Tube Cleaning Equipment and Accessories from Elliott Tool Technologies

•	End Prep Systems
•	Retubing Tools
•	Rolling Motors / Torque Controls
•	Specialty Tools
•	Tube Cleaners
•	Tube Cutters
•	Tube Expanders
•	Tube Testers / Tube Plugs

Tube Cleaners

Die-Hard Cableless Tube Cleaners
Spend your time cleaning the vessel, not hassling with the cleaner!

Features

No cable! That's right - never spend time or money on replacement flex shafts or cables again.
Rugged engineering and construction for higher uptime and lower repair costs.
3 feet / second auto feed for high productivity.
Ergonomic design for lower labor costs and higher operator satisfaction.
Quad cleaning action for better cleaning and productivity.

Roto- Jet Rotary Tube Cleaners
Models 0620/0620R (Electric)
Model 0420 (Pneumatic)

Features

Dual foot pedal converts Model 0620 to Model 062OR for reversible service
Integral ground fault protection system
Break-Away coupling system for flexible shafts
Flexible shaft drive and integral water purge
Auxiliary receptacle
Built in removable shafts and accessories are interchangeable with competitive unit

Effective Solutions
To reduce energy costs, tubes in heat exchangers, boilers, evaporators and chillers should be cleaned regularly. Silicate, sulfite, sulfate carbonate, calcium and organic deposits form in most tubing during normal operations. Those deposits increase fuel consumption by acting as insulation, that reduces heat transfer efficiency. They may also restrict tube inner diameter and flow, requiring more energy to drive the system. What's more, they can cause corrosion in some tubing materials. Elliott's Roto-Jet Rotary Tube cleaners quickly remove the deposits and produce immediate reduction in operating costs.

Siphon Tube Cleaners

Siphon Tube Cleaners In aluminum smelting, molten aluminum is periodically siphoned from the reduction pots through curved steel siphon tubes. Conventional air motors and drill and drill heads can be used to ream out the deposits which accumulate within the siphon tube.

Jumbo Jiffy Gun
Series-5371

Jumbo Jiffy Gun

Specifically designed for easy cleaning of today's power plant condenser tubes
Strong scouring stream uses both air and water pressure
Shoots brushes (or scrubbers) through the dirty tube. Sludge, mud, algae ... all soft deposits ... are scoured away in seconds

Tube Sizes: 3/4 -1-1/2" O.D.
Tube lengths: up to 60 feet.
Water pressure: 40 PSI or more
Air pressure: 40 PSI or more
Weight: 3-1/2 lbs

Features

It's fast. Insert brush or scrubber, place nozzle in tube, squeeze trigger ... the tube is clean. A single trigger operates both water and air feed
It's easy on the operator. Gun weighs only 3 1/2 pounds. Trigger valve is balanced so that little finger pressure is needed
No mess ... no splash. a rubber collar around the nozzle expands when trigger is pulled; seals gun in tube like a cork
It's safe. If a tube is completely clogged, a relief valve "de-pressures" the tube. No risk of a backfiring brush or plug injuring the operator
It's adaptable. One gun handles tube from 3/4 inch through 1 112 inch O.D. Inexpensive, interchangeable nozzles adapt gun to tube size being cleaned
Hose available in 7-1/2", 15', 25' and 50' lengths

Nylon Brushes

Spiral Filled Nylon (for soft deposits)
5022-Series

Economy Nylon (for soft deposits)
5503-Series

Scrubbers

Molded Flexible
5506-Series

Molded Rigid
5521-Series

Spherical
5505-Series

To receive more information about the above products, please call, fax, e-mail or use our Inquiries page